Rezaur Rabbi

This is Rezaur Rabbi working with Exclusive Web Services


1 Comment

Unicare® Moisturizing Lotion

Image

Protecting skin integrity through balanced hydrationThe AHRQ Clinical Practice Guideline on Pressure Ulcer Prevention indicates there is an increased association between dry, flaky or scaling skin and an increased incidence of pressure ulcers.1 Maintaining proper skin hydration can help reduce the risks to skin integrity like skin tears and skin breakdown.

Description
 
Features & Benefits
  • Moisturizes dry skin, absorbs quickly
  • Non-irritating, non-sensitizing, non-allergenic
  • pH balanced to help maintain proper skin function
  • Aloe and Allantoin naturally soothe and condition
  • May be used on patients undergoing radiation therapy
 
IndicationsConditions, soothes, and moisturizes dry skin

 
PrecautionsFor external use only. Discontinue use if itching, burning or redness appears.

 
Instructions for Use:
Use as often as required. Apply liberally as needed.


1 Comment

Versajet Hydrosurgery System

Description:
The VERSAJET II Hydrosurgery System uses a razor-thin saline jet to optimize surgical debridement. The system enables a surgeon to precisely select, excise and evacuate nonviable tissue, bacteria and contaminants from wounds, burns and soft tissue injuries using a tissue-preserving technique. This reduces time to closure and may reduce overall treatment costs.Optimize surgical debridement with the VERSAJET II Hydrosurgery System.


1 Comment

Viscopaste™ PB7 Zinc Paste Bandage

                                                                   
 
Features.
  • Open weave bandage
  • Impregnated with zinc paste
  • Individually wrapped
  • Open weave bandage
  • Easy to apply and remove
  • Will not dry out
  • Moist wound healing environment over an ulcer
  • Impregnated with zinc paste
  • Comfortable and soothing
  • Individually wrapped
  • Easy identification
  • Easy storage
 
Indications
For the management of leg ulcers. Where venous insufficiency exists, the paste bandage should be adjunct to the graduated compression bandaging. For the management of chronic eczema/dermatitis where occlusion is indicated.
 

Precautions

Where venous insufficiency exists, VISCOPASTE ™ PB7 may be used under graduated compression bandaging, after first assessing the patient to exclude arterial disease. The use of Doppler ultrasound is recommended for this purpose.

Compression bandaging should not be used on patients who have arterial disease (ABPI<0.8) and is not recommended for use on diabetic patients with advanced small vessel disease.

Failure to detect reduced arterial flow can result in pressure necrosis, amputation, or even death. The risk of a patient having arterial as well as venous disease rises with age.

The skin of leg ulcer patients is easily sensitized to topical medicaments – including preservatives. Sensitization should be suspected in patients, particularly where there is deterioration of the surrounding skin. Such patients should be referred for a specialist consult.

 
Instructions for Use:
Applying VISCOPASTE ™ PB7
This product is ready for use upon removal from the sealed pouch and wrapper.
 
There are two ways that the bandage can be applied:

Method 1

Beginning at the base of the toes, the bandage should be loosely wrapped around the foot, heel and around the leg in a spiral fashion to just below the knee. Once applied, the bandage should then be smoothed and molded around the leg.

 

Method 2

Beginning at the base of the toes, the bandage should be loosely wrapped around the foot and heel and then, whilst wrapping from the ankle, apply a pleat, at the front of the leg. This should be repeated up the leg until just below the knee. Compression bandaging may follow. OnceVISCOPASTE ™ PB7 has been applied, the leg should be covered by a bandage or dressing to prevent soiling of clothes and bedcovers.


Leave a comment

REPLICARE ™ Ultra is an advanced hydrocolloid dressing

 

REPLICARE ™ Ultra is an advanced hydrocolloid dressing which offers optimal exudate management and increased absorption capability.

 

Features and Benefits

 

REPLICARE ™ Ultra’s improved design provides better evaporation through an adaptable polyurethane top film that regulates moisture vapor transmission rate. This allows excess moisture to evaporate while maintaining the proper moist wound environment.

The top film is waterproof, easy to clean and aids in the prevention of bacterial contamination.

Unique micro-thin edges and enhanced adhesive offer better adherence, reduced leakage potential and chance of edge roll.

REPLICARE ™ Ultra can remain in place for up to 7 days for convenience, fewer dressing changes and a reduction in nursing costs.

In addition, it is offered in a sacral design to conform to the difficult to dress sacral region.

 

 

Indications

 

For Healthcare Professional applications, REPLICARE ™ Ultra dressings may be used in Stage I through Stage IV wounds with light to moderate exudate, such as:

  • Pressure Ulcers
  • Leg Ulcers
  • Superficial Burns
  • Superficial Wounds
  • Donor Sites
  • Skin Abrasions
  • Partial Thickness Burns

 

 

Precautions

 

During the body’s normal healing process, unnecessary material is removed from the wound, which will make the wound appear larger after the first few dressing changes. If the wound continues to get larger after the first few dressing changes, discontinue use and consult a healthcare professional.

Should any signs of irritation (reddening, inflammation), maceration (over-hydration of the skin), hypergranulation (excess tissue) or sensitivity (allergic reactions) appear, discontinue use and consult a healthcare professional.

Do not use product if its packaging is open or damaged prior to use.

REPLICARE ™ Ultra is a single-use product. It should not be re-used.

Do not use product on (1) ulcers resulting from infection, such as tuberculosis, syphilis and deep fungal infections; (2) lesions in patients with acute vasculitis, such as periarteritis nodosa, systemic lupus erythematosus, and cryoglobulinemia; or (3) third degree burns.

REPLICARE ™ Ultra dressing must be removed prior to radiation therapy.

 

Instructions for Use:

 

The following are designed to act as general guidelines and should only be used under the supervision of a healthcare professional.

 

Step 1

Cleanse the wound using sterile saline or a recommended commercial brand of wound cleanser such as Dermal Wound Cleanser. Gently pat dry the skin around the wound. SKIN-PREP ™ is recommended to protect the peri-wound skin.

 

Step 2

Choose a dressing that allows for ½” to 1” overlap of the wound.

 

Step 3

Remove the protective paper, exposing the adhesive surface. Use the clear, plastic handle to ensure aseptic application.

 

Step 4

Place the adhesive side to the wound and remove the handle.

 

Step 5

As REPLICARE ™ Ultra absorbs wound exudate, a gel is formed. When the gel reaches the upper film surface of the dressing, the dressing becomes white or opaque. Maximum absorbency is reached when the dressing becomes opaque and the exudate extends ½” from the edges of the dressing.

 

Changing the dressing:

 

Step 1

To remove the REPLICARE ™ Ultra dressing, lift one corner of the dressing and gently pull the dressing away from the wound. To aid in removal of the dressing, REMOVE ™ Adhesive Remover may be used.

 

Step 2

Gently cleanse the wound with tap water, sterile saline or recommended commercial brand wound cleanser such as Dermal Wound Cleanser.

 

Step 3

Follow instructions for applying a fresh dressing.


1 Comment >

 

Image
REPLICARE ™ Ultra is an advanced hydrocolloid dressing which offers optimal exudate management and increased absorption capability.

 

Features and Benefits

REPLICARE ™ Ultra’s improved design provides better evaporation through an adaptable polyurethane top film that regulates moisture vapor transmission rate. This allows excess moisture to evaporate while maintaining the proper moist wound environment.

The top film is waterproof, easy to clean and aids in the prevention of bacterial contamination.

Unique micro-thin edges and enhanced adhesive offer better adherence, reduced leakage potential and chance of edge roll.

REPLICARE ™ Ultra can remain in place for up to 7 days for convenience, fewer dressing changes and a reduction in nursing costs.

In addition, it is offered in a sacral design to conform to the difficult to dress sacral region.

 

Indications

For Healthcare Professional applications, REPLICARE ™ Ultra dressings may be used in Stage I through Stage IV wounds with light to moderate exudate, such as:

  • Pressure Ulcers
  • Leg Ulcers
  • Superficial Burns
  • Superficial Wounds
  • Donor Sites
  • Skin Abrasions
  • Partial Thickness Burns

 

Precautions

During the body’s normal healing process, unnecessary material is removed from the wound, which will make the wound appear larger after the first few dressing changes. If the wound continues to get larger after the first few dressing changes, discontinue use and consult a healthcare professional.

Should any signs of irritation (reddening, inflammation), maceration (over-hydration of the skin), hypergranulation (excess tissue) or sensitivity (allergic reactions) appear, discontinue use and consult a healthcare professional.

Do not use product if its packaging is open or damaged prior to use.

REPLICARE ™ Ultra is a single-use product. It should not be re-used.

Do not use product on (1) ulcers resulting from infection, such as tuberculosis, syphilis and deep fungal infections; (2) lesions in patients with acute vasculitis, such as periarteritis nodosa, systemic lupus erythematosus, and cryoglobulinemia; or (3) third degree burns.

REPLICARE ™ Ultra dressing must be removed prior to radiation therapy.

 

Instructions for Use:

The following are designed to act as general guidelines and should only be used under the supervision of a healthcare professional.

 

Step 1

Cleanse the wound using sterile saline or a recommended commercial brand of wound cleanser such as Dermal Wound Cleanser. Gently pat dry the skin around the wound. SKIN-PREP ™ is recommended to protect the peri-wound skin.

 

Step 2

Choose a dressing that allows for ½” to 1” overlap of the wound.

 

Step 3

Remove the protective paper, exposing the adhesive surface. Use the clear, plastic handle to ensure aseptic application.

 

Step 4

Place the adhesive side to the wound and remove the handle.

 

Step 5

As REPLICARE ™ Ultra absorbs wound exudate, a gel is formed. When the gel reaches the upper film surface of the dressing, the dressing becomes white or opaque. Maximum absorbency is reached when the dressing becomes opaque and the exudate extends ½” from the edges of the dressing.

 

Changing the dressing:

 

Step 1

To remove the REPLICARE ™ Ultra dressing, lift one corner of the dressing and gently pull the dressing away from the wound. To aid in removal of the dressing, REMOVE ™ Adhesive Remover may be used.

 

Step 2

Gently cleanse the wound with tap water, sterile saline or recommended commercial brand wound cleanser such as Dermal Wound Cleanser.

 

Step 3

Follow instructions for applying a fresh dressing.


1 Comment

Replicare® Ultra Advanced Hydrocolloid Dressing

 

Image

REPLICARE ™ Ultra is an advanced hydrocolloid dressing which offers optimal exudate management and increased absorption capability.

Features and Benefits

    REPLICARE ™ Ultra’s improved design provides better evaporation through an adaptable polyurethane top film that regulates moisture vapor transmission rate. This allows excess moisture to evaporate while maintaining the proper moist wound environment.

    The top film is waterproof, easy to clean and aids in the prevention of bacterial contamination.

    Unique micro-thin edges and enhanced adhesive offer better adherence, reduced leakage potential and chance of edge roll.

    REPLICARE ™ Ultra can remain in place for up to 7 days for convenience, fewer dressing changes and a reduction in nursing costs.

    In addition, it is offered in a sacral design to conform to the difficult to dress sacral region.

 

Indications

For Healthcare Professional applications, REPLICARE ™ Ultra dressings may be used in Stage I through Stage IV wounds with light to moderate exudate, such as:

 

  • Pressure Ulcers
  • Leg Ulcers
  • Superficial Burns
  • Superficial Wounds
  • Donor Sites
  • Skin Abrasions
  • Partial Thickness Burns

 

 

Precautions 

During the body’s normal healing process, unnecessary material is removed from the wound, which will make the wound appear larger after the first few dressing changes. If the wound continues to get larger after the first few dressing changes, discontinue use and consult a healthcare professional.

Should any signs of irritation (reddening, inflammation), maceration (over-hydration of the skin), hypergranulation (excess tissue) or sensitivity (allergic reactions) appear, discontinue use and consult a healthcare professional.

Do not use product if its packaging is open or damaged prior to use.

REPLICARE ™ Ultra is a single-use product. It should not be re-used.

Do not use product on (1) ulcers resulting from infection, such as tuberculosis, syphilis and deep fungal infections; (2) lesions in patients with acute vasculitis, such as periarteritis nodosa, systemic lupus erythematosus, and cryoglobulinemia; or (3) third degree burns.

REPLICARE ™ Ultra dressing must be removed prior to radiation therapy.

 

Instructions for Use:

The following are designed to act as general guidelines and should only be used under the supervision of a healthcare professional.

 

Step 1

Cleanse the wound using sterile saline or a recommended commercial brand of wound cleanser such as Dermal Wound Cleanser. Gently pat dry the skin around the wound. SKIN-PREP ™ is recommended to protect the peri-wound skin.

 

Step 2

Choose a dressing that allows for ½” to 1” overlap of the wound.

 

Step 3

Remove the protective paper, exposing the adhesive surface. Use the clear, plastic handle to ensure aseptic application.

 

Step 4

Place the adhesive side to the wound and remove the handle.

 

Step 5

As REPLICARE ™ Ultra absorbs wound exudate, a gel is formed. When the gel reaches the upper film surface of the dressing, the dressing becomes white or opaque. Maximum absorbency is reached when the dressing becomes opaque and the exudate extends ½” from the edges of the dressing.

 

Changing the dressing:

 

Step 1

To remove the REPLICARE ™ Ultra dressing, lift one corner of the dressing and gently pull the dressing away from the wound. To aid in removal of the dressing, REMOVE ™ Adhesive Remover may be used.

 

Step 2

Gently cleanse the wound with tap water, sterile saline or recommended commercial brand wound cleanser such as Dermal Wound Cleanser.

 

Step 3

Follow instructions for applying a fresh dressing.